These are electronic series spring clamp double level Terminal Blocks with built in diodes and LED. The built in diode acts as a free wheeling diode which is connected across the inductive load such as relay coils, solenoid valves, contactor coils to eliminate or suppress sudden voltage spike which appears across the load when its supply voltage is removed. CXDL2.5(E)LD1 Terminal Block has a built in LED circuit for online indication. CX2.5/4(E)D1 is specially designed 4 wire spring clamp Terminal Block with a built in diode. This Terminal has a built in 1N4007 diode for reverse polarity protection and also allows uni directional flow of current.
2.5 sq.mm Terminal Blocks with diode circuit - D1 configuration
| Conductor Cross Section Stranded min. | 0.2 mm² |
| Conductor Cross Section Stranded max. | 2.5 mm² |
| Stripping Length | 10 mm |
| Rated Current | 1 A |
| Notes On Product | The Rated current is with the use of copper (Cu) conductor/Wire |
| Width (Thickness) | 5 mm |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
2.5 sq.mm Terminal Blocks with diode circuit - D2 configuration
| Conductor Cross Section Stranded min. | 0.2 mm² |
| Conductor Cross Section Stranded max. | 2.5 mm² |
| Stripping Length | 10 mm |
| Rated Current | 1 A |
| Notes On Product | The Rated current is with the use of copper (Cu) conductor/Wire |
| Width (Thickness) | 5 mm |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
2.5 sq.mm Terminal Blocks with in Push In Connection with diode circuit - D3 configuration
| Conductor Cross Section Stranded min. | 0.2 mm² |
| Conductor Cross Section Stranded max. | 2.5 mm² |
| Stripping Length | 10 mm |
| Rated Current | 1 A |
| Notes On Product | The Rated current is with the use of copper (Cu) conductor/Wire |
| Width (Thickness) | 5 mm |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
2.5 sq.mm Terminal Blocks in Pushin connection with diode circuit - DD1 configuration
| Conductor Cross Section Stranded min. | 0.2 mm² |
| Conductor Cross Section Stranded max. | 2.5 mm² |
| Stripping Length | 10 mm |
| Rated Current | 1 A |
| Notes On Product | The Rated current is with the use of copper (Cu) conductor/Wire |
| Width (Thickness) | 5 mm |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
2.5 sq.mm Terminal Blocks in pushin connection with diode circuit - DD2 configuration
| Conductor Cross Section Stranded min. | 0.2 mm² |
| Conductor Cross Section Stranded max. | 2.5 mm² |
| Stripping Length | 10 mm |
| Rated Current | 1 A |
| Notes On Product | The Rated current is with the use of copper (Cu) conductor/Wire |
| Width (Thickness) | 5 mm |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
2.5 sq.mm Terminal Blocks in Push in with diode circuit - DD3 configuration
| Conductor Cross Section Stranded min. | 0.2 mm² |
| Conductor Cross Section Stranded max. | 2.5 mm² |
| Stripping Length | 10 mm |
| Rated Current | 1 A |
| Notes On Product | The Rated current is with the use of copper (Cu) conductor/Wire |
| Width (Thickness) | 5 mm |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |
2.5 sq.mm Terminal Blocks in push-in connection with diode circuit - DD4 configuration
| Conductor Cross Section Stranded min. | 0.2 mm² |
| Conductor Cross Section Stranded max. | 2.5 mm² |
| Stripping Length | 10 mm |
| Rated Current | 1 A |
| Notes On Product | The Rated current is with the use of copper (Cu) conductor/Wire |
| Width (Thickness) | 5 mm |
| Mounting Possibility | DIN 35/DIN 35-15 Rail |