ConnectWell logo
Connectwell Logo
Global : English
Items in Cart
0
 
Home » Products » Interface Modules » CIMRE Interface Module » 1 Changeover/ 2 Channel »

CIMRE1SS2/24/OM

Specifications Download PDF Email PDF Add To Cart Share
3dlogo
Relay Module 1CO 2CH 24VDC (SPDT)
  • Fully-enclosed IP20 rated design
  • Custom configurations up to 32 channels
  • Long Tail Jumpers.
  • Ergonomic for wiring ease
  • High quality standards and approvals
  • Long-life laser marking
  • Additional all-axis marking provision
  • Over voltage category: III
  • Pollution degree :2
  • Option to select Pluggable/Soldered Relays
  • Standard and reverse type marking option available.
  • Low Coil Drive Current (4.7 mA to 100 mA).
  • LED indication to denote relay actuation.
  • Freewheeling diode across relay coil.
TECHNICAL DATA
Bussing Possiblity By using spare jumpers.*****
Supply Voltage Indication 3mm Red LED
Relay Protection Method Using 1N4007 Free Wheeling Diode
Ambient Operating Temperature -20 to 50 °C
Mounting PossibilityDIN 35/DIN 35-15 Rail
Housing MaterialPC
Housing Colour Grey
Rated Input voltage 24 VDC
Rated output Currrent/channel 10 A
RELAY GENERAL SPECIFICATIONS
Relay TypeElectromechanical Relay
Relay Make / ManufacturerOmron/ G2RL-1 DC24
Dielectric StrengthBetween Coil & Contact - 5000VAC Between Contacts - 1000VAC
Insulation Resistance1000 Mohm
Relay ApprovalsUL,CSA, VDE,SEMCO
RELAY INPUT / COIL SPECIFICATIONS
Nominal Operating Voltage24 VDC
Nominal Input Current16.7 mA
Maximum Operating Voltage31.2 VDC
Must Operate Voltage16.8 VDC
Must Release Voltage2.4 VDC
Nominal Input Power400 mW
Coil Resistance1440 Ω
RELAY OUTPUT/CONTACT SPECIFICATIONS
Contact TypeSPDT - 1CO
Contact MaterialAg-alloy (Cd free)
Contact Resistance100 mΩ max.
Rated Contact Current (Resistive Load)12 A
Load Voltage Range250VAC/24VDC
Life Expectancy-Mechanical20,000,000 operations (at 18,000 operations/hr)
Life Expectancy-Electrical50,000 operations at 250 VAC, 12 A 30,000 operations at 24 VDC, 12 A
Maximum Switching Voltage440VAC/300VDC V
Maximum Operating Frequency18000 Opr./Hr (Mechanical)
CONNECTION SPECIFICATIONS
Type of ConnectionScrew Connection
Min. Wire Size 0.5 mm²
Max. Wire Size 2.5 mm²
Min. Wire Size(AWG) 20 AWG
Max. Wire Size(AWG) 12 AWG
Screw SizeM2.5
Wire Stripping Length8 mm
Torque0.4 Nm
Torque3.5 lb-in
ORDERING INFORMATION
CAT. NO.DESCRIPTIONNO. OF CHN.DIM. DET.STD. PACK
CIMRE1SS2/24/OM1CO 2CH 24VDC CW Relay Module With Base (Pluggable Relay) Rail Mount 259.1 x 77 x 541
CIMRE1S2/24/OM1CO 2CH 24VDC CW Relay Module With Soldered Relay Rail Mount 259.1 x 77 x 501
ACCESSORIES
IMAGES
CAT. NO. DESCRIPTION STD. PACK
CA701
CA701-1M Din 35 Rail unslotted 1 meter 50
CA701-2M Din 35 Rail unslotted 2 meter 50
CA701-2M-S Din 35 Rail slotted 2 meter 50
CA701-1M-S Din 35 Rail slotted 1 meter 50
CA701-15
CA701-15-1M Din 35 Rail 15 deep unslotted 1 meter 50
CA701-15-1M-S Din 35 Rail 15 deep slotted 1 meter 50
CA701-15-2M Din 35 Rail 15 deep unslotted 2 meter 50
CA701-15-2M-S Din 35 Rail 15 deep slotted 2 meter 50
SCS0.5/3AC
SCS0.5/3 Electricians Screwdriver for slotted screws 10
GMH8
GMH8 Group Marker suitable for mounting on CA103 100
GMH8N
GMH8N Group Marker suitable for mounting on CA103 100
IMACC/G2RL1/24DC
IMACC/G2RL1/24DC RELAY OMRON G2RL 1CO 24DC 10
IMACC/CIMRE/EXT
IMACC/CIMRE/EXT Extension Cable for CIMRE 50
CIRCUIT DIAGRAM
NOTES
***Module with Other Coil Voltage like 6 VDC, 48 VDC, 24 VAC, etc. are available on request. All values in the are the initial values at 23°C. **** Module is Factory-built common negative, To change to common positive move the Jumpers to PC. ***** To use as a standard module without bussing put the jumpers into spare parking space available on Module. All values in the are the initial values at 23°C.
NOTES
***Module with Other Coil Voltage like 6 VDC, 48 VDC, 24 VAC, etc. are available on request. All values in the are the initial values at 23°C. **** Module is Factory-built common negative, To change to common positive move the Jumpers to PC. ***** To use as a standard module without bussing put the jumpers into spare parking space available on Module. All values in the are the initial values at 23°C.
Home » Products » Interface Modules » CIMRE Interface Module » 1 Changeover/ 2 Channel »
Home » Products » Interface Modules » CIMRE Interface Module » 1 Changeover/ 2 Channel »
CIMRE1SS2/24/OM
PDFDownload
E-mailPDF
Cart_icon
Share
CIMRE1SS2/24/OM
Relay Module 1CO 2CH 24VDC (SPDT)
  • Fully-enclosed IP20 rated design
  • Custom configurations up to 32 channels
  • Long Tail Jumpers.
  • Ergonomic for wiring ease
  • High quality standards and approvals
  • Long-life laser marking
  • Additional all-axis marking provision
  • Over voltage category: III
  • Pollution degree :2
  • Option to select Pluggable/Soldered Relays
  • Standard and reverse type marking option available.
  • Low Coil Drive Current (4.7 mA to 100 mA).
  • LED indication to denote relay actuation.
  • Freewheeling diode across relay coil.

GENERAL SPECIFICATION

TECHNICAL DATA
Bussing Possiblity By using spare jumpers.*****
Supply Voltage Indication 3mm Red LED
Relay Protection Method Using 1N4007 Free Wheeling Diode
Ambient Operating Temperature -20 to 50 °C
Mounting PossibilityDIN 35/DIN 35-15 Rail
Housing MaterialPC
Housing Colour Grey
Rated Input voltage 24 VDC
Rated output Currrent/channel 10 A

DIODE SPECIFICATIONS

FUSE SPECIFICATIONS

CONNECTION SPECIFICATIONS

CONNECTION SPECIFICATIONS
Type of ConnectionScrew Connection
Min. Wire Size 0.5 mm²
Max. Wire Size 2.5 mm²
Min. Wire Size(AWG) 20 AWG
Max. Wire Size(AWG) 12 AWG
Screw SizeM2.5
Wire Stripping Length8 mm
Torque0.4 Nm

IDC / FRC CONNECTOR SPECIFICATIONS

DSUB CONNECTOR SPECIFICATIONS

RJ45 CONNECTOR ORIENDATION

RELAY GENERAL SPECIFICATIONS

RELAY GENERAL SPECIFICATIONS
Dielectric StrengthBetween Coil & Contact - 5000VAC Between Contacts - 1000VAC
Insulation Resistance1000 Mohm
Relay ApprovalsUL,CSA, VDE,SEMCO
Relay Make / ManufacturerOmron/ G2RL-1 DC24
Relay TypeElectromechanical Relay

RELAY INPUT / COIL SPECIFICATIONS

RELAY INPUT / COIL SPECIFICATIONS
Nominal Operating Voltage24 VDC
Coil Resistance1440 Ω
Nominal Input Current16.7 mA
Must Operate Voltage16.8 VDC
Must Release Voltage2.4 VDC
Maximum Operating Voltage31.2 VDC
Nominal Input Power400 mW

RELAY OUTPUT/CONTACT SPECIFICATIONS

RELAY OUTPUT/CONTACT SPECIFICATIONS
Contact TypeSPDT - 1CO
Contact MaterialAg-alloy (Cd free)
Rated Contact Current (Resistive Load)12 A
Maximum Switching Voltage440VAC/300VDC V
Load Voltage Range250VAC/24VDC
Contact Resistance100 mΩ max.
Maximum Operating Frequency18000 Opr./Hr (Mechanical)
Life Expectancy - Mechanical 20,000,000 operations (at 18,000 operations/hr)
Life Expectancy-Electrical50,000 operations at 250 VAC, 12 A 30,000 operations at 24 VDC, 12 A

FUSE HOLDER SPECIFICATIONS

ORDERING INFORMATION

ORDERING INFORMATION
CAT. NO.DESCRIPTIONNO. OF CHN.DIM. DET.STD. PACK
CIMRE1SS2/24/OM1CO 2CH 24VDC CW Relay Module With Base (Pluggable Relay) Rail Mount 259.1 x 77 x 541
CIMRE1S2/24/OM1CO 2CH 24VDC CW Relay Module With Soldered Relay Rail Mount 259.1 x 77 x 501

ACCESSORIES

ACCESSORIES
IMAGES
CAT. NO. DESCRIPTION STD. PACK
CA701
CA701-1M Din 35 Rail unslotted 1 meter 50
CA701-2M Din 35 Rail unslotted 2 meter 50
CA701-2M-S Din 35 Rail slotted 2 meter 50
CA701-1M-S Din 35 Rail slotted 1 meter 50
CA701-15
CA701-15-1M Din 35 Rail 15 deep unslotted 1 meter 50
CA701-15-1M-S Din 35 Rail 15 deep slotted 1 meter 50
CA701-15-2M Din 35 Rail 15 deep unslotted 2 meter 50
CA701-15-2M-S Din 35 Rail 15 deep slotted 2 meter 50
SCS0.5/3AC
SCS0.5/3 Electricians Screwdriver for slotted screws 10
GMH8
GMH8 Group Marker suitable for mounting on CA103 100
GMH8N
GMH8N Group Marker suitable for mounting on CA103 100
IMACC/G2RL1/24DC
IMACC/G2RL1/24DC RELAY OMRON G2RL 1CO 24DC 10
IMACC/CIMRE/EXT
IMACC/CIMRE/EXT Extension Cable for CIMRE 50

MOV SPECIFICATIONS

TRANSISTOR SPECIFICATIONS

Isolator Specifications

RC SPECIFICATIONS

CONNECTION DIAGRAM / PIN CONFIGURATIONS

PRODUCT DRAWING

CIRCUIT DIAGRAM

CIRCUIT DIAGRAM

NOTES

NOTES
***Module with Other Coil Voltage like 6 VDC, 48 VDC, 24 VAC, etc. are available on request. All values in the are the initial values at 23°C. **** Module is Factory-built common negative, To change to common positive move the Jumpers to PC. ***** To use as a standard module without bussing put the jumpers into spare parking space available on Module. All values in the are the initial values at 23°C.