Polyamide > Screw Clamp
CTL2.5U(I.S)
Triple Level Terminal Blocks
Triple Level Terminal Blocks CTL2.5U(I.S)
Triple Level
Terminal Blocks		 Terminal Block Pitch 6 mm
Height x Width 67 x 84 mm
Connection Possibility  

These Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit.
The top level of the CTL2.5UH Terminal Block provides connection points for signal wires while the middle and bottom level are used for positive and negative potentials.
In applications where switching indication is required, choice
of CTL2.5UHL, CTL2.5UL with built-in electronic components
is available.

 Stranded Wire 0.5 to 2.5 sq.mm
Solid Wire 0.5 to 4 sq.mm
Stripping Length 9 mm
Insulation / Comparative
Material     Tracking Index		 Polyamide 66 / I
Type of Connection 6 Screw clamps internally shorted
       
Rated Connection Capacity
22-12 AWG
0.5-2.5 sq.mm
22-12 AWG
Voltage Rating
300 V
400 V
300 V
Rated Impulse Voltage / Pollution Degree
4 KV / 3
Current Rating
25 A
24 A
25 A
Torque
4.5 lb-in
0.4 Nm
4.5 lb-in
 

Marking tags in blue and red colour besides the conventional white colour are suggested for effective identification.
CTL2.5U(I.S) Terminal Block is an internally shorted Terminal Block which can be used for distribution applications.
CTL2.5U(I.S)D2 is an internally shorted Terminal Block with a
built-in Diode for reverse
polarity protection.

 

 

  
Type Cat. No.
Std. Packing in Pcs.

Terminal Block
CTL2.5U(I.S)
50
End Plate
EPCTL2.5U
50
Mounting Rail
CA501
CA701
CA701-15

50 m
50 m
50 m
End Clamp 
CA702
CA802
CA202
50
50
50
                                                       2 way  
Insulated Comb Type                  3 way  
Shorting Links *                           4 way  
                                                    10 way  
CA715/2
CA715/3
CA715/4
CA715/10

100
100
100
20
Test Socket
CA707/TS/01
100
Marking Tags         (K Type)
CA509/K2
100