Polyamide > Screw Clamp
CDB4(1)
Terminal Blocks : Distribution Blocks
Terminal Blocks : Distribution Blocks : CDB4(1)
Distribution Blocks Terminal Block Pitch 6 mm
Stripping Length 9 mm
Connection Possibility                 Input
Stranded Wire / Solid Wire)        Output		 1.5 to 16 sq.mm
0.5 to 4 sq.mm / 0.5 to 6 sq.mm 

The CDB range of Distribution Blocks is an ideal choice for a simplified distribution system.
A bolt in the center of the block provides a connection point for the incoming cable. All the terminals are internally connected and provide multiple connection points for the outgoing wires.
A protective shield effectively shrouds the incoming connection.
CDB4(1) blocks are recommended for applications where the input connection point is located at one end instead of the center.
CMDB blocks are a modified version of the CDB Terminal Blocks without the central incoming terminal connection.

 Insulation / Comparative
Material     Tracking Index		 Polyamide 66 / I

Type of Connection                      Input


                                                       Output

 1 Screw flat connection for ring lugs
(Nut Driver Operated)

Screw clamp connection
(Screw Driver Operated)
Approvals
CSA
VDE
UL
Rated Connection Capacity        Input
                                                       Output
10-8 AWG
22-12 AWG
6-16 sq.mm
0.5-4 sq.mm
10-8 AWG
22-10 AWG
Voltage Rating
600 V
800 V
600 V
Rated Impulse Voltage / Pollution Degree
8 KV / 3
Current Rating       Input
                                Output (on either side)
50 A
25 A

32 A
50 A
25 A
Torque                                           Input
                                                       Output
26 lb-in
7 lb-in
2.0 Nm
0.5 Nm
26 lb-in
7 lb-in
Other Approvals
CE, IEC, TUV, S Mark

Note:
Sum of outgoing currents on either side of the center should not exceed half the maximum permissible incoming current
Sum of total outgoing currents should not exceed maximum permissible incoming current.
Connection for higher outgoing currents should be done through the terminal nearest to the incoming connection.

 

  
Type Cat. No.
Std. Packing in Pcs.

Terminal Block   

CDB4/2(1)
CDB4/3(1)
CDB4/4(1)
CDB4/5(1)
CDB4/6(1)
CDB4/10(1)
CDB4/11(1)

10
10
10
10
10
10
10
Mounting Rail
CA501
CA701
CA701-15

50 m
50 m
50 m
End Clamp 
CA702
CA802
50
50
Marking Tags         (K Type)
CA509/K6
100
     

 

 

  
Type
Cat. No.
HxWxT
(mm)
No. of
Output

 

CDB4/2(1)
45 x 43 x 52

6

 

CDB4/3(1)
45 x 43 x 58

8

 

CDB4/4(1)
45 x 43 x 64

10

 

CDB4/5(1)
45 x 43 x 70

12

 

CDB4/6(1)
45 x 43 x 76

14

 

CDB4/10(1)
45 x 43 x 100

22

 

CDB4/11(1)
45 x 43 x 106

24