Terminal Blocks & Connectors

Interface Modules
With Electro Mechanical Relays
With Solid State Relays
Transistor Modules
Passive Modules
Protection Modules
Fan Failure Module
Digital Input Modules(Optoisolator)
Slim relay module - Electromechanical
Screw clamp
5V
12V
24V
CSR1S-24DYA
CSR1S-24UYA
CSR1S-24DYB
CSR1S-24UYB
CSR1S-24DYBV0
ADOF24V
48-60V
120 V
230V
Spring clamp
Slim relay module - SSR
Slim Solid State Relay
Accessories

Switch-Mode Power Supply

Professional Tools

Marking and Engraving Systems

DIN Rail Socket and Switches

Home » Products » Interface Modules » Slim relay module - Electromechanical » Screw clamp » 24V »

CSR1S-24DYB

Specifications

CW Slim Relay Module 1CO 24VDC

Compact 6.0mm thin design.
Variety of Operating Voltages.
High switching current: up to 6A at 250VAC
Low coil power consumption: 175 mW.
LED Indication on Coil activation.
No requirement on polarity of input voltage (except 5 VDC &24VDC Relay).
Possibility of Jumpering up to 8 channels with a single link.
Easy Legibility marker
Choice of Pluggable Electromechanical Relays Or Solid State Relays.
Choice of Screw & Spring Clamp Connection
Special Snubber based Slim Relays are Available.
Integrated Input Protection.

TECHNICAL DATA
Bussing Possiblity	By Using Push in Jumper
Relay on Indication	3mm Green LED
Ambient Operating Temperature	-40 to +55 °C
Mounting Possibility	DIN 35/DIN 35-15 Rail
Housing Material	PA 6,6
Housing Colour	Grey
Rated Voltage	24 VDC
Input Polarity Protection	Reverse Polarity Protection, Rectifier based Protection.
Relay type	Electromecahnical

RELAY GENERAL SPECIFICATIONS
Relay Type	Electromechanical
Relay Make / Manufacturer	Connectwell
Dielectric Strength	4 KVAC
Insulation Resistance	Min 1000Mohm at 500VDC
Relay Approvals	UL,VDE

RELAY INPUT / COIL SPECIFICATIONS
Nominal Operating Voltage	24 VDC
Nominal Input Current	8 mA
Must Operate Voltage	15.9 VDC
Must Release Voltage	1.2 VDC
Nominal Input Power	170 mW
Coil Resistance	3390 Ω

RELAY OUTPUT/CONTACT SPECIFICATIONS
Contact Type	1 CO
Contact Material	AgSnO2
Contact Resistance	100 m ohms at 1A 6 VDC
Rated Contact Current (Resistive Load)	6 A
Load Voltage Range	400 VAC, 125 VDC at Reduced Load
Life Expectancy-Mechanical	10,000,000 operations min.
Life Expectancy-Electrical	For NO contacts 50,000 Operations, For NC 30,000 Operations
Maximum Switching Power	1500 VA, 180W

CONNECTION SPECIFICATIONS
Type of Connection	Screw Connection
Min. Wire Size	0.2 mm²
Max. Wire Size	2.5 mm²
Min. Wire Size(AWG)	24 AWG
Max. Wire Size(AWG)	12 AWG
Wire Stripping Length	10 mm
Torque	0.4 Nm
Approvals

ORDERING INFORMATION

CAT. NO.

DESCRIPTION

NO. OF CHN.

DIM. DET.

STD. PACK

CSR1S-24DYB

1CO 24VDC Single Channel Slim Relay Module With Plugable Relay Rail Mount

6 x 94.5 x 96

ACCESSORIES

IMAGES

CAT. NO.

DESCRIPTION

STD. PACK

CA701-1M	Din 35 Rail unslotted 1 meter	50
CA701-2M	Din 35 Rail unslotted 2 meter	50
CA701-2M-S	Din 35 Rail slotted 2 meter	50
CA701-1M-S	Din 35 Rail slotted 1 meter	50

CA701-15-1M	Din 35 Rail 15 deep unslotted 1 meter	50
CA701-15-1M-S	Din 35 Rail 15 deep slotted 1 meter	50
CA701-15-2M	Din 35 Rail 15 deep unslotted 2 meter	50
CA701-15-2M-S	Din 35 Rail 15 deep slotted 2 meter	50

CA509/K6

Blank Marking Tag

100

SCS0.5/3

Electricians Screwdriver for slotted screws

JX4/2	Shorting Link for 6 mm wide TB	100
JX4/3	Shorting Link for 6 mm wide TB	50
JX4/4	Shorting Link for 6 mm wide TB	50
JX4/8	Shorting Link for 6 mm wide TB	10

SRL1-24D

RELAY 1CO 24VDC

PRODUCT DRAWING

CIRCUIT DIAGRAM

NOTES
UL File No Slim Relay - E485864 UL File No for Socket - E485865 UL File no for Relay - E504909

NOTES
UL File No Slim Relay - E485864 UL File No for Socket - E485865 UL File no for Relay - E504909

Home » Products » Interface Modules » Slim relay module - Electromechanical » Screw clamp » 24V »

CSR1S-24DYB

CW Slim Relay Module 1CO 24VDC

Compact 6.0mm thin design.
Variety of Operating Voltages.
High switching current: up to 6A at 250VAC
Low coil power consumption: 175 mW.
LED Indication on Coil activation.
No requirement on polarity of input voltage (except 5 VDC &24VDC Relay).
Possibility of Jumpering up to 8 channels with a single link.
Easy Legibility marker
Choice of Pluggable Electromechanical Relays Or Solid State Relays.
Choice of Screw & Spring Clamp Connection
Special Snubber based Slim Relays are Available.
Integrated Input Protection.

GENERAL SPECIFICATION

TECHNICAL DATA
Bussing Possiblity	By Using Push in Jumper
Relay on Indication	3mm Green LED
Ambient Operating Temperature	-40 to +55 °C
Mounting Possibility	DIN 35/DIN 35-15 Rail
Housing Material	PA 6,6
Housing Colour	Grey
Rated Voltage	24 VDC
Input Polarity Protection	Reverse Polarity Protection, Rectifier based Protection.
Relay type	Electromecahnical

DIODE SPECIFICATIONS

FUSE SPECIFICATIONS

CONNECTION SPECIFICATIONS

CONNECTION SPECIFICATIONS
Type of Connection	Screw Connection
Min. Wire Size	0.2 mm²
Max. Wire Size	2.5 mm²
Min. Wire Size(AWG)	24 AWG
Max. Wire Size(AWG)	12 AWG
Wire Stripping Length	10 mm
Torque	0.4 Nm
Approvals

IDC / FRC CONNECTOR SPECIFICATIONS

DSUB CONNECTOR SPECIFICATIONS

RJ45 CONNECTOR ORIENDATION

RELAY GENERAL SPECIFICATIONS

RELAY GENERAL SPECIFICATIONS
Dielectric Strength	4 KVAC
Insulation Resistance	Min 1000Mohm at 500VDC
Relay Approvals	UL,VDE
Relay Make / Manufacturer	Connectwell
Relay Type	Electromechanical

RELAY INPUT / COIL SPECIFICATIONS

RELAY INPUT / COIL SPECIFICATIONS
Nominal Operating Voltage	24 VDC
Coil Resistance	3390 Ω
Nominal Input Current	8 mA
Must Operate Voltage	15.9 VDC
Must Release Voltage	1.2 VDC
Nominal Input Power	170 mW

RELAY OUTPUT/CONTACT SPECIFICATIONS

RELAY OUTPUT/CONTACT SPECIFICATIONS
Contact Type	1 CO
Contact Material	AgSnO2
Rated Contact Current (Resistive Load)	6 A
Load Voltage Range	400 VAC, 125 VDC at Reduced Load
Maximum Switching Power	1500 VA, 180W
Contact Resistance	100 m ohms at 1A 6 VDC
Life Expectancy - Mechanical	10,000,000 operations min.
Life Expectancy-Electrical	For NO contacts 50,000 Operations, For NC 30,000 Operations

FUSE HOLDER SPECIFICATIONS

ORDERING INFORMATION


ORDERING INFORMATION
CAT. NO.	DESCRIPTION	NO. OF CHN.	DIM. DET.	STD. PACK
CSR1S-24DYB	1CO 24VDC Single Channel Slim Relay Module With Plugable Relay Rail Mount	1	6 x 94.5 x 96	10

ACCESSORIES

IMAGES

CAT. NO.

DESCRIPTION

STD. PACK

CA701-1M	Din 35 Rail unslotted 1 meter	50
CA701-2M	Din 35 Rail unslotted 2 meter	50
CA701-2M-S	Din 35 Rail slotted 2 meter	50
CA701-1M-S	Din 35 Rail slotted 1 meter	50

CA701-15-1M	Din 35 Rail 15 deep unslotted 1 meter	50
CA701-15-1M-S	Din 35 Rail 15 deep slotted 1 meter	50
CA701-15-2M	Din 35 Rail 15 deep unslotted 2 meter	50
CA701-15-2M-S	Din 35 Rail 15 deep slotted 2 meter	50

CA509/K6

Blank Marking Tag

100

SCS0.5/3

Electricians Screwdriver for slotted screws

JX4/2	Shorting Link for 6 mm wide TB	100
JX4/3	Shorting Link for 6 mm wide TB	50
JX4/4	Shorting Link for 6 mm wide TB	50
JX4/8	Shorting Link for 6 mm wide TB	10

SRL1-24D

RELAY 1CO 24VDC

MOV SPECIFICATIONS

TRANSISTOR SPECIFICATIONS

Isolator Specifications

RC SPECIFICATIONS

CONNECTION DIAGRAM / PIN CONFIGURATIONS

PRODUCT DRAWING

PRODUCT DRAWING

CIRCUIT DIAGRAM

CIRCUIT DIAGRAM

NOTES

NOTES
UL File No Slim Relay - E485864 UL File No for Socket - E485865 UL File no for Relay - E504909


Add to Cart
Image	CAT. NO.	Checked
	CSR1S-24DYB

Catalouge Number	DESCRIPTION	NO. OF CHN.	Length of Module	Standard Packing Quantity
CSR1S-24DYB	1CO 24VDC Single Channel Slim Relay Module With Plugable Relay Rail Mount	1	6 x 94.5 x 96	10