ConnectWell logo
Connectwell Logo
Global : English
Items in Cart
0
 
Home » Products » Interface Modules » Slim relay module - Electromechanical » Screw clamp » 120 V »

CSR1S-120UYB-SN

Specifications Download PDF Email PDF Add To Cart Share
3dlogo
Slim Relay Module 1CO 120VUC With Inbuilt Snubber Protection to protect from Short term voltage spikes.

-Compact 6.0mm thin design.
-Coil Voltage - 120VAC/VDC input.
-High switching current : up to 6A at 250VAC.
-low coil power consumption: 175 mW.
-LED Indication on Coil activation.
-Need not to care about the Polarity
- Possibility of Jumpering up to 8 channels with a single link.
-RC protection for short term voltage spikes.
TECHNICAL DATA
Bussing Possiblity By push in type shorting lonks
Relay on Indication 3mm Green LED
Ambient Operating Temperature -40 to +55 °C
Mounting PossibilityDIN 35/DIN 35-15 Rail
Housing MaterialPA 6,6
Housing Colour Grey
Rated Voltage 120 V
Input Polarity Protection Bridge Rectifier
Input Signal Protection RC Protection.
RELAY GENERAL SPECIFICATIONS
Relay TypeElectromechanical relay
Relay Make / ManufacturerConnectwell/
Dielectric Strength1000VAC (Between contacts), 4000 VAC ( between coil and contacts)
Insulation Resistance1000MOhm @ 500VDC
Relay ApprovalsUL,CE,VDE
RELAY INPUT / COIL SPECIFICATIONS
Nominal Operating Voltage120 V
Nominal Input Current7.4 mA
Maximum Operating Voltage132 V
Must Operate Voltage90 V
Must Release Voltage21 V
Nominal Input Power890 mVA
RELAY OUTPUT/CONTACT SPECIFICATIONS
Contact Type1 CO
Contact MaterialAgSnO2
Contact Resistance100 m ohms at 1A 6 VDC
Rated Contact Current (Resistive Load)6 A
Load Voltage Range400 VAC, 125 VDC at Reduced Load
Life Expectancy-Mechanical10,000,000 operations min.
Life Expectancy-ElectricalNO-50,000 OPS, NC-30,000 OPS For 6A@250VAC/24VDC
Maximum Switching Power1500 VA, 144W
CONNECTION SPECIFICATIONS
Type of ConnectionScrew Connection
Min. Wire Size 0.2 mm²
Max. Wire Size 2.5 mm²
Min. Wire Size(AWG) 24 AWG
Max. Wire Size(AWG) 12 AWG
Wire Stripping Length10 mm
Torque0.4 Nm
ORDERING INFORMATION
CAT. NO.DESCRIPTIONNO. OF CHN.DIM. DET.STD. PACK
CSR1S-120UYB-SN1CO 120VUC Single Channel snubber protected Slim Relay Module With Plugable Relay Rail Mount 16 x 94.5 x 9610
ACCESSORIES
IMAGES
CAT. NO. DESCRIPTION STD. PACK
CA701
CA701-1M Din 35 Rail unslotted 1 meter 50
CA701-2M Din 35 Rail unslotted 2 meter 50
CA701-2M-S Din 35 Rail slotted 2 meter 50
CA701-1M-S Din 35 Rail slotted 1 meter 50
CA701-15
CA701-15-1M Din 35 Rail 15 deep unslotted 1 meter 50
CA701-15-1M-S Din 35 Rail 15 deep slotted 1 meter 50
CA701-15-2M Din 35 Rail 15 deep unslotted 2 meter 50
CA701-15-2M-S Din 35 Rail 15 deep slotted 2 meter 50
SCS0.5/3AC
SCS0.5/3 Electricians Screwdriver for slotted screws 10
CA509/K6
CA509/K6 Blank Marking Tag 100
JX4/2
JX4/2 Shorting Link for 6 mm wide TB 100
JX4/3 Shorting Link for 6 mm wide TB 50
JX4/4 Shorting Link for 6 mm wide TB 50
JX4/8 Shorting Link for 6 mm wide TB 10
SRL1-60D
SRL1-60D RELAY 1CO 60VDC 10
PRODUCT DRAWING
CIRCUIT DIAGRAM
Home » Products » Interface Modules » Slim relay module - Electromechanical » Screw clamp » 120 V »
Home » Products » Interface Modules » Slim relay module - Electromechanical » Screw clamp » 120 V »
CSR1S-120UYB-SN
PDFDownload
E-mailPDF
Cart_icon
Share
CSR1S-120UYB-SN
Slim Relay Module 1CO 120VUC With Inbuilt Snubber Protection to protect from Short term voltage spikes.

-Compact 6.0mm thin design.
-Coil Voltage - 120VAC/VDC input.
-High switching current : up to 6A at 250VAC.
-low coil power consumption: 175 mW.
-LED Indication on Coil activation.
-Need not to care about the Polarity
- Possibility of Jumpering up to 8 channels with a single link.
-RC protection for short term voltage spikes.

GENERAL SPECIFICATION

TECHNICAL DATA
Bussing Possiblity By push in type shorting lonks
Relay on Indication 3mm Green LED
Ambient Operating Temperature -40 to +55 °C
Mounting PossibilityDIN 35/DIN 35-15 Rail
Housing MaterialPA 6,6
Housing Colour Grey
Rated Voltage 120 V
Input Polarity Protection Bridge Rectifier
Input Signal Protection RC Protection.

DIODE SPECIFICATIONS

FUSE SPECIFICATIONS

CONNECTION SPECIFICATIONS

CONNECTION SPECIFICATIONS
Type of ConnectionScrew Connection
Min. Wire Size 0.2 mm²
Max. Wire Size 2.5 mm²
Min. Wire Size(AWG) 24 AWG
Max. Wire Size(AWG) 12 AWG
Wire Stripping Length10 mm
Torque0.4 Nm

IDC / FRC CONNECTOR SPECIFICATIONS

DSUB CONNECTOR SPECIFICATIONS

RJ45 CONNECTOR ORIENDATION

RELAY GENERAL SPECIFICATIONS

RELAY GENERAL SPECIFICATIONS
Dielectric Strength1000VAC (Between contacts), 4000 VAC ( between coil and contacts)
Insulation Resistance1000MOhm @ 500VDC
Relay ApprovalsUL,CE,VDE
Relay Make / ManufacturerConnectwell/
Relay TypeElectromechanical relay

RELAY INPUT / COIL SPECIFICATIONS

RELAY INPUT / COIL SPECIFICATIONS
Nominal Operating Voltage120 V
Nominal Input Current7.4 mA
Must Operate Voltage90 V
Must Release Voltage21 V
Maximum Operating Voltage132 V
Nominal Input Power890 mVA

RELAY OUTPUT/CONTACT SPECIFICATIONS

RELAY OUTPUT/CONTACT SPECIFICATIONS
Contact Type1 CO
Contact MaterialAgSnO2
Rated Contact Current (Resistive Load)6 A
Load Voltage Range400 VAC, 125 VDC at Reduced Load
Maximum Switching Power1500 VA, 144W
Contact Resistance100 m ohms at 1A 6 VDC
Life Expectancy - Mechanical 10,000,000 operations min.
Life Expectancy-ElectricalNO-50,000 OPS, NC-30,000 OPS For 6A@250VAC/24VDC

FUSE HOLDER SPECIFICATIONS

ORDERING INFORMATION

ORDERING INFORMATION
CAT. NO.DESCRIPTIONNO. OF CHN.DIM. DET.STD. PACK
CSR1S-120UYB-SN1CO 120VUC Single Channel snubber protected Slim Relay Module With Plugable Relay Rail Mount 16 x 94.5 x 9610

ACCESSORIES

ACCESSORIES
IMAGES
CAT. NO. DESCRIPTION STD. PACK
CA701
CA701-1M Din 35 Rail unslotted 1 meter 50
CA701-2M Din 35 Rail unslotted 2 meter 50
CA701-2M-S Din 35 Rail slotted 2 meter 50
CA701-1M-S Din 35 Rail slotted 1 meter 50
CA701-15
CA701-15-1M Din 35 Rail 15 deep unslotted 1 meter 50
CA701-15-1M-S Din 35 Rail 15 deep slotted 1 meter 50
CA701-15-2M Din 35 Rail 15 deep unslotted 2 meter 50
CA701-15-2M-S Din 35 Rail 15 deep slotted 2 meter 50
SCS0.5/3AC
SCS0.5/3 Electricians Screwdriver for slotted screws 10
CA509/K6
CA509/K6 Blank Marking Tag 100
JX4/2
JX4/2 Shorting Link for 6 mm wide TB 100
JX4/3 Shorting Link for 6 mm wide TB 50
JX4/4 Shorting Link for 6 mm wide TB 50
JX4/8 Shorting Link for 6 mm wide TB 10
SRL1-60D
SRL1-60D RELAY 1CO 60VDC 10

MOV SPECIFICATIONS

TRANSISTOR SPECIFICATIONS

Isolator Specifications

RC SPECIFICATIONS

CONNECTION DIAGRAM / PIN CONFIGURATIONS

PRODUCT DRAWING

PRODUCT DRAWING
CSR1S-120UYB-SN

CIRCUIT DIAGRAM

CIRCUIT DIAGRAM

NOTES