Global : English
Items in Cart
0
 
Home » News » Knowledge Base »

Terminal Block Assembly

Terminal Block Assembly

TERMINAL BLOCK ASSEMBLY

To make complete banks of terminal blocks, three accessories are necessary, they are : Mounting rails, End Plate and End Clamp. Connectwell terminal blocks are intended to be mounted on rails manufactured to International Standards. They are all designed for front mounting, so no rear access is necessary. The open side of last terminal block in row of the assembly must be closed by an end plate. End clamp / stop keeps the end plate in position and supports the unit, particularly, when arranged vertically. Partition / barrier / Separator plate are used for visual and electrical separation of different group of terminal blocks.

Connectwell terminal blocks with Screw Clamp Connection & Spring Clamp Connection when mounted in this way, are totally protected  against accidental contact with live parts. However degree of protection changes when cross connecting accessories are installed. The terminal blocks are designed in such a way that all types of rated cross section can be connected without special preparation. All Connectwell terminal blocks can be easily cross connected by using suitable shorting links and studs / sleeves. Connectwell terminal blocks are  provided with suitable recesses for marking tags. Marking tags can be inserted prior to or after mounting of terminal blocks.